How To Use Structural Pipe Fittings Install A Desk Quickly？

Pipe Railings Fittings Single Socket Tee 101. We can set one pipe in one end, insert another in the other end, and then tighten the screw of the Single Socket Tee to connect the two pipes at 90° and form a T shape. Single Socket Tee is a structural pipe fitting used to build most geometric structures, such as furniture, handrails, and guardrails.

Pipe Railing Systems 90 Degree Two Socket Tee 116 has a straight and two sockets. The two sockets are 90° and on a plane, and the straight-through is perpendicular to the plane of the socket. This kind of pipe railing fittings can put the straight-through on a pipe, insert the other two in the two sockets, and then tighten the screws to get a two-plane structure at 90°. 90 Degree Two Socket Tee can be used to build tables and stands. It can also be used to construct guardrails or handrails with two sides perpendicular.

Pipe Handrail Fittings 90 Degree 2 Way Elbow 125 can make two pipes build a 90-degree right-angle structure in the same plane. It has a hemispherical right angle, which is more secure. It is one type of pipe handrail fittings that is often used, and it has various materials such as malleable steel, stainless steel, ductile iron, and aluminum alloy. After galvanizing, powder coating, polishing, and other surface treatments, it will have a better anti-rust ability and be more beautiful. We often use 90 Degree 2 Way Elbow to make rectangular or square structures, such as safety gates, table supports, drying racks, guardrails, handrails, etc. 

128 Side Outlet Elbow is a type of structure used in Pipe Rail Fittings to provide three perpendicular surfaces for guardrails, handrails, workbenches, and table supports. Based on the 90°2 Way Elbow, two sockets are extended on one side. The other vertical socket can use three pipes to form three mutually perpendicular planes. The other end of the pipe can be connected with other Pipe Rail Fittings. It is made of aluminum alloy, malleable steel, stainless steel, ductile iron, and other materials. After surface treatment, such as powder coating and galvanizing, it will have different anti-rust capabilities and appearances. It only has three fastening screws and is easy to install.

As a commonly used type in Pipe Handrail Fittings, 131 Base Flange is mainly used for the link between the structure and the ground or platform. There are four holes in the flange to fix it more firmly. 131 Base Flange has a variety of materials, among which malleable steel and ductile iron are the most used. Pipe Handrail Fittings can also undergo surface treatment such as powder coating, hot-dip galvanizing, and electro-galvanizing, among which hot-dip galvanizing is the most used because it not only has a good appearance but also can be used in harsher environments. 131 Base Flange is most commonly used in handrail and guardrail systems and can also be used to fix tables, brackets, etc.

149 Sleeve Joint is a structural pipe fitting that can be used to build Pipe Railing Systems. Its role is to connect two pipes to increase the length of the transverse railing in Pipe Railing Systems. 149 Sleeve Joint can only be used in straight guardrails or handrails because it is straight. If you need to adjust the angle of the horizontal railing, you can choose to use, 123, 124, 125, and 125H. If you need to make the horizontal railing look more even, you can choose to use 150 internal joints. The manufacture of 149 Sleeve Joint mostly uses malleable steel and ductile iron as raw materials and uses a sand casting process. If it is an aluminum structural pipe fitting, a casting process is required. HULK Metal can provide excellent structural pipe fittings production services. You can contact us no matter what your needs are.